INTERLUX

Bilgekote Enamel

Bilgekote Enamel, White, Quart image number 0
INTERLUX
Bilgekote Enamel
5 out of 5 Customer Rating
Model # 3822020 Mfg # YMA102/QT
Model # 3822020 Mfg # YMA102/QT
Color: White
Quantity not available. Please adjust.
Temporarily Out of Stock
Email Icon
Thank you! We'll let you know when it's back in stock.
-
+

Protect bilge areas with solvent- and sludge-resistant BilgeKote Enamel.

Bilgekote is a fast-drying, durable coating formulated for application to bilge areas. Bilgekote helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Additionally, Bilgekote can be used to protect lockers and bulkheads from moisture penetration. 

Key Features

  • Resistant to chemicals, fuel, oil and fumes
  • Cleans easily for reduced maintenance 
  • Considerable application covering due to the paints high density
  • Hard-wearing coating for bulkheads  

Physical Data

  • Type: One-part enamel  
  • Finish: Semi-gloss 
  • Available Colors: Gray, White  
  • Components: 1
  • Solids by Volume: 44% 
  • Coverage: 450sq.ft/gal.
  • VOC: 414g/l

Application

  • Application Method: Brush, roller, airless or conventional spray
  • Number of Coats Recommended: 2-3 minimum 
  • Wet Film Thickness/coat: 4.5 mils
  • Dry Film Thickness/coat: 2 mils
  • Application Temperature Min./Max. Range: Minimum 50°F. and Maximum 95°F. 
  • Thinner: Brushing Liquid 333, Model 117945 or Special Thinner 216, Model 117598 

Drying Times*  (Hours)

Drying @59°F @73°F @95°F
To recoat  3 hr.  2 hr. 1 hr.
To launch  16 hr. 12 hr. 8 hr.

Application Method 1 to 2 Coats Recommended; Brush , Roller or Spray
Capacity 1 Quart
Color White
Coverage 112 Square Feet/Quart
Cure Time To Overcoat: 1-3 Hours; To Launch: 8-16 Hours
Type Bilge Enamel
Warning