Perfection Two-Part Polyurethane Topside Paint

Easy-to-master two-part painting system for professional and D.I.Y. application.

Simpler to use than other two-part polyurethanes, Perfection has been formulated to enable “do-it-yourselfers” to easily achieve professional quality results on topsides, superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection—even on the highest wear areas. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Not for use over one-part enamels. Perfection is for application above the waterline only.

Key Features

• Durable, abrasion-resistant finish
• Good choice for high-traffic areas
• Exceptional gloss
• Resistant to diesel, petrol, oil, mild acids and alkalis
• Professional results made easy 

Physical Data

• Formulation: Two-part polyurethane
• Finish: High Gloss  
• Volume Solids: 49% 
• VOC: 686g/lit.

Application

• Number of Coats Recommended: Spray: Half coat plus two full coats minimum; Brush/roller: Two full coats minimum
• Coverage: Theoretical: 541.4sq.ft./gal.; Practical: 488.5sq.ft.gal.
• Recommended DFT: 1.5 mils dry
• Recommended WFT: 3 mils wet
• Application Temperatures: Ambient temperature should be minimum 50°(10°C) and maximum 104°F (40°C)
• Application Methods: Brush, conventional spray, roller
• Mixing Ratio: 2:1 (Kit includes base and reactor.)
• Compatibility/substrates: Apply only over sanded two-part polyurethane finishes, Interlux Epoxy Primekote 404 or Interprime 880.
• Thinner: Brushing or rolling: Y2333N (10% by volume); Spraying: 2316N

Drying Times

More information

Foror detailed application instructions see the Perfection Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.