Oil Change Pump, 12V
|Amperage||10 Amps at 12 Volts|
|Capacity||25.2 Quarts per Minute|
|Dimensions||4 7/16" x 3 3/4" x 7 7/8"|
|Reverse Cycle||Reverse Cycle|
Product OverviewThe Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
- Pump Body: Bronze
- Port Size: 3/8" NPT
- Impeller: Nitrile
- Shaft Seal: Buna Lip Type
- Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.