H2 Prime Water-Based Two-Part Epoxy Primer, Gallon
1 Coat Minimum; Up to 3 Coats Recommended for Best Results
Brush, Roller or Spray
|Coverage||350 Square Feet/Gallon|
|Cure Time||To Recoat: 2-3 Hours; To Overcoat: Overnight Minimum Required|
|Type||Low VOC, Two-Part Epoxy Adhesive Primer|
Pettit Paints H2 Prime is a waterborne, two-part epoxy adhesive primer. The low VOC formula is recommended for use above or below the waterline on properly prepared substrates such as epoxy resins, fiberglass, polyester and vinylester gelcoats, wood, concrete, and many previously‐painted surfaces. Its tenacious bond to bare fiberglass and most other substrates makes H2Prime an excellent under-coater for all Pettit solvent and waterbased topside and antifouling paints. Extended overcoating times provides much easier scheduling and a lower chance of application failure due to missed windows. As a topside primer, H2Prime can be easily sanded when cured, effectively filling scratches and imperfections. H2Prime will also seal fairing or other filler work prior to top-coating or application of anti‐fouling paint.
- Cleans up with soap and water
- Part of Pettit’s no-sand fiberglass system
- Modern technology provides lower VOC and low odor
- Flexible recoat windows takes the guesswork out of overcoating
- Provides excellent adhesion to polyester and vinylester gelcoats, as well as epoxies
- Size: Gallon
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.