TIE DOWN ENGINEERING–Hi-Tensile Anchors
Prices from $164.99 - To $869.99
$249.99
In stock online.
Model # 321986 | Mfg # 94020UPC # 81628940206
Specs
| Name | Value |
|---|---|
| Benefits |
Extremely Strong Excellent Holding Power in Sand and Mud Bottoms |
| Best Use |
Sand Mud |
| Boat Length | 25 to 42 Feet |
| Design | Danforth |
| Dimensions |
Shank Length 28 1/4" Stock Width 21 1/2" Fluke Length 13 1/2" |
| Material | Galvanized Steel |
| Not Recommended For | Less Effective on Grassy, Rocky or Clay Bottoms |
| Type | Premimum Fluke |
| Warranty Details | One Year Limited |
| Weight | 12 Pounds |
| Name | Value |
|---|---|
| Benefits |
Extremely Strong Excellent Holding Power in Sand and Mud Bottoms |
| Best Use |
Sand Mud |
| Boat Length | 32 to 50 Feet |
| Design | Danforth |
| Dimensions |
Shank Length 35" Stock Width 26 3/4" Fluke Length 19" |
| Material | Galvanized Steel |
| Not Recommended For | Less Effective on Grassy, Rocky or Clay Bottoms |
| Type | Premimum Fluke |
| Warranty Details | One Year Limited |
| Weight | 20 Pounds |
| Name | Value |
|---|---|
| Benefits |
Extremely Strong Excellent Holding Power in Sand and Mud Bottoms |
| Best Use |
Sand Mud |
| Boat Length | 50 to 64 Feet |
| Design | Danforth |
| Dimensions |
Shank Length 40 3/4" Stock Width 31" Fluke Length 22" |
| Material | Galvanized Steel |
| Not Recommended For | Less Effective on Grassy, Rocky or Clay Bottoms |
| Type | Premimum Fluke |
| Warranty Details | One Year Limited |
| Weight | 35 Pounds |
| Name | Value |
|---|---|
| Benefits |
Extremely Strong Excellent Holding Power in Sand and Mud Bottoms |
| Best Use |
Sand Mud |
| Boat Length | 18 to 31 Feet |
| Design | Danforth |
| Dimensions |
Shank Length 21 1/2" Stock Width 16 1/2" Fluke Length 11 3/4" |
| Material | Galvanized Steel |
| Not Recommended For | Less Effective on Grassy, Rocky or Clay Bottoms |
| Type | Premimum Fluke |
| Warranty Details | One Year Limited |
| Weight | 5 Pounds |
| Name | Value |
|---|---|
| Benefits |
Extremely Strong Excellent Holding Power in Sand and Mud Bottoms |
| Best Use |
Sand Mud |
| Boat Length | 64 to 72 Feet |
| Design | Danforth |
| Dimensions |
Shank Length 50" Stock Width 38" Fluke Length 27" |
| Material | Galvanized Steel |
| Not Recommended For | Less Effective on Grassy, Rocky or Clay Bottoms |
| Type | Premimum Fluke |
| Warranty Details | One Year Limited |
| Weight | 60 Pounds |
Product Overview
For excellent holding power on sand and mud bottoms
Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. The shank is drop-forged for added strength and rests on special reinforcing yokes inside angled crown plates to assure a 32° shank angle. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance.
- Style: High-Strength Pivoting Steel Fluke
- Material: Galvanized Steel
- Application: Sand or Sand/Mud Bottoms
- Pros: Original Danforth dimensions. Excellent holding power per pound. Precise shank/fluke angle. Excellent in sand or sand/mud bottoms.
- Cons: Relatively expensive, due to materials and construction techniques. Limited or no holding in grassy, rocky or clay bottoms.
- Warranty: One Year Limited
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.Advice
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.