Skip to content Skip to navigation menu

Transducer Paint


Hazard Shipping – Ships ground in U.S. Lower 48.
Model # 5436902 | Mfg # 411179320
In stock online.
Protects all types of non-aluminum underwater metals

Formulated to protect electronics transducers from underwater fouling in both fresh and salt water. For use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater metals and running gear and inhibits corrosion. Because of its smooth hard surface air will self-clean in service, and can be used above or below the waterline. Do not overcoat with antifouling paint. Spray can for easy application. 16oz. Dark gray.

Not for sale in California and in States where prohibited by law.

  • Type: Modified epoxy
  • Recommended Usage: Transducers and underwater metals
  • Biocide: Zinc
  • Additives: None
  • Number of Coats Recommended: Two full coats
  • Coverage: 10 sq.ft./can
  • Drying Time: One hour

Transducer Paint

Aluminum Safe Not Aluminum Safe
Anti-Slime Additive Zinc Omadine
Biocide Zinc
Color Gray
Copper Free Copper Free
Coverage 15 Square Feet
Cure Time To Overcoat: 1 Hour; To Launch: 24 Hours at 70 Degrees F
Size 16 Ounces
Type Transducer Antifouling

West Advisor

The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.


by PowerReviews
Pettit Paints Transducer Paint

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top

(2 of 3 customers found this review helpful)


Good stuff

By Warren on "CrewZen"

from Deale, Md

About Me Advanced


  • Easy to Use
  • Protects Well
  • Visually Pleasing
  • Weather Proof


  • Moderately durable
  • Too expensive

Best Uses

  • Bronze shaftprop

Comments about Pettit Paints Transducer Paint:

I've used this product on the bronze shaft and prop of my H28.5 sailboat. It will normally just about last thru the 8-month season on the Chesapeake Bay. It seems to protect against hard growth moderately well. A lot depends on how much the engine is used and how high the rpm's are.

Displaying review 1

Back to top