Skip to content Skip to navigation menu

WEST MARINE
SeaGloss Pro One-Part Polyurethane Topside Paint

Brighten up your vessel with our one-part polyurethane paint

Manufactured exclusively for West Marine, Sea Gloss Pro flows on smoothly and dries to a hard, protective coating with high gloss, excellent color retention and long life. Brushed or rolled, this smooth-flowing enamel enables you to achieve the pleasing look of sprayed-on application. Protects primed fiberglass, wood, aluminum and steel. Highly resistant to strong chemicals, cleaning solutions and alcohol. Two coats are recommended.

  • Base Formulation: One-part polyurethane/silicone alkyd enamel
  • Recommended Usage: Above water applications
  • Number of Coats Recommended: Two
  • Primer Needed: If surface is checked or in poor condition use SeaGloss Pro Primer, Model 5437140
  • Drying Time: To recoat: 8 to 24hrs.
  • Coverage: 150sq.ft./qt.; 600sq.ft./gallon
  • Thinner: 10% or less. West Marine Thinner/Dewaxer, Model 5437207
Product Models
Description WM Model # MFG Part # Availability Price Quantity  
White Semi Gloss Quart, Seagloss 5437124 411310608
In stock online.

$39.99

Seagloss Paint - Off White Quart 5437132 411310808
In stock online.

$39.99

Paint,Seagloss White - Gallon 5437108 411317506
In stock online.

$109.99

White, Quart - Seagloss 5437116 411317508
In stock online.

$39.99

Seagloss Paint - Navy Quart 5437173 411323708
In stock online.

$39.99

Seagloss Paint - Quart Black 5437165 411380108
In stock online.

$39.99

SeaGloss Pro Primer, White 5437140 411614908
In stock online.

$38.99

Product Description

Brighten up your vessel with our one-part polyurethane paint

Manufactured exclusively for West Marine, Sea Gloss Pro flows on smoothly and dries to a hard, protective coating with high gloss, excellent color retention and long life. Brushed or rolled, this smooth-flowing enamel enables you to achieve the pleasing look of sprayed-on application. Protects primed fiberglass, wood, aluminum and steel. Highly resistant to strong chemicals, cleaning solutions and alcohol. Two coats are recommended.

  • Base Formulation: One-part polyurethane/silicone alkyd enamel
  • Recommended Usage: Above water applications
  • Number of Coats Recommended: Two
  • Primer Needed: If surface is checked or in poor condition use SeaGloss Pro Primer, Model 5437140
  • Drying Time: To recoat: 8 to 24hrs.
  • Coverage: 150sq.ft./qt.; 600sq.ft./gallon
  • Thinner: 10% or less. West Marine Thinner/Dewaxer, Model 5437207

Specs

West Advisor

The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.

REVIEW SNAPSHOT®

by PowerReviews
West MarineSeaGloss Pro One-Part Polyurethane Topside Paint
 
3.7

(based on 17 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (2)

85%

of respondents would recommend this to a friend.

Pros

  • Visually pleasing (12)
  • Easy to use (11)
  • Protects well (5)
  • Weather proof (3)

Cons

No Cons

Best Uses

  • Outdoors (7)
    • Reviewer Profile:
    • Casual/ recreational (5), Beginner (4), Professional (3)
    • Was this a gift?:
    • No (5)

Most Liked Positive Review

 

Painted my track car with it...

I used this product to paint my track car to protect it from the elements. I simply used a 4" foam roller and this paint thinned way beyond recommended ratio 1 part...Read complete review

I used this product to paint my track car to protect it from the elements. I simply used a 4" foam roller and this paint thinned way beyond recommended ratio 1 part paint to 3 parts thinner (skim milk) to thin out the coats and allow wetsanding between to get an automotive looking paint job. This product works great even thinned that much. I put 8 coats on the car using 1 quart of paint thinned as described. After wetsanding between coats 1000+ grit and buffing the final finish I have minimal orange peel and true 'depth' in the finish. I love how durable it is and how well it stands up to oil, gasoline, brake fluid, etc.

VS

Most Liked Negative Review

 

3 days and the non-skid still smears.

Non-skid still smears after 3 days. It has been humid but I have never experienced this after countless marine painting projects. This is the first time with West Marine paint. I will give...Read complete review

Non-skid still smears after 3 days. It has been humid but I have never experienced this after countless marine painting projects. This is the first time with West Marine paint. I will give it a few more days then return the empty can as a very angry customer.

Reviewed by 17 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
3.0

Old mako

By Mako man

from South florida

About Me Professional

Verified Buyer

Pros

  • Easy to Use
  • Protects Well
  • Visually Pleasing
  • Weather Proof

Cons

    Best Uses

      Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

      Used this on a 30 plus year old boat. It look good again! I am a realist and it is not perfect but it does look good. It is all about the prep you do.

      • Was this a gift?:
      • No
       
      4.0

      Found this product to be of great quality.

      By Henry

      from Miami, Fl

      About Me Casual/ Recreational

      Verified Buyer

      Pros

      • Easy to Use
      • Visually Pleasing
      • Weather Proof

      Cons

        Best Uses

        • Outdoor

        Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

        It met my expectations

        • Was this a gift?:
        • No

        (0 of 1 customers found this review helpful)

         
        1.0

        3 days and the non-skid still smears.

        By RiverJim

        from Boca Raton Florida

        About Me Advanced

        Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

        Non-skid still smears after 3 days. It has been humid but I have never experienced this after countless marine painting projects. This is the first time with West Marine paint. I will give it a few more days then return the empty can as a very angry customer.

        • Was this a gift?:
        • No

        (1 of 1 customers found this review helpful)

         
        5.0

        Affordable good-looking topside paint

        By CJ

        from Virginia Beach, VA

        About Me Professional

        STAFF REVIEWER

        Pros

        • Durable
        • Easy to Use
        • Visually Pleasing

        Cons

          Best Uses

          • Fiberglass
          • Indoor
          • Outdoor
          • Wood

          Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

          Same exact quality, application, and ease-of-use as the competitors (EZpoxy and Brightside). If you follow the label instructions and use thin coats, rolled and tipped it looks quite good. Can be "flattened" if you don't want high gloss. Leftover paint can also be flattened and have nonskid particles added to it, so this paint can do double duty if you need paint your deck as well. I highly recommend this for wooden or fiberglass interior or exterior, as well as use on wooden hulls above the waterline. The only downside to this paint is that it isn't offered in more colors.

          • Was this a gift?:
          • No

          (2 of 2 customers found this review helpful)

           
          4.0

          Good results!

          By Rich

          from Orlando, Florida

          About Me Professional

          Verified Buyer

          Pros

          • Easy to Use
          • Visually Pleasing

          Cons

            Best Uses

            • Outdoor

            Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

            I am restoring an old trawler. I recently used awlgrip for the hull above the waterline, but took a chance on this paint for cabin sides. It went on easy, flattened well, and didn't require mixing. The only warning is that is does run, so be careful in application.

            • Was this a gift?:
            • No

            (3 of 3 customers found this review helpful)

             
            5.0

            FIRST TIMER!

            By Dave

            from Texas Gulf Coast

            About Me Beginner

            Pros

            • Easy to Use
            • Incexpensive
            • Visually Pleasing

            Cons

            • Dries A Little To Fast

            Best Uses

              Comments about West Marine SeaGloss Pro One-Part Polyurethane Topside Paint:

              I used this on my 31 foot fountain to paint the inside of the boat. This is the first time I've ever tried this and I was a bit apprehensive to say the least. I started with a short nap roller as recommended on the can and followed by "tipping" with a fine brush. This was a disaster and that particular section will need to be sanded and repainted. However, I ran to Walmart and got a foam roller. It think it was about 4 inches and was very small in diameter, about an inch. This was the key for me. After making this switch, everything went very smooth. I put the paint on in one direction the lightly rolled out the bubbles and streaks in the perpendicular direction. I now have a perfectly smooth finish. The paint dried in the pan rather quickly, so be aware of that and plan to poor small amounts as you go. It will take several hours for it to become dry to the touch, so stay off it for a while. The biggest problem I have is that several small bugs landed in the middle and will have to be removed at a later date. Hope this helps! Remember, try the foam roller first and save yourself the hassle of streaks and nap fibers in the paint!

              (1 of 4 customers found this review helpful)

               
              2.0

              Not great

              By Bodine

              from East coast

              About Me Casual/ Recreational

              Pros

              • Easy to Use
              • Visually Pleasing

              Cons

                Best Uses

                  Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

                  Bought WestMarine's brand paint in order to save a few bucks, and quickly realized I shouldnt have. I bought Off white for my topside , after putting the first roll on I realized the paint was almost a light yellow. thinking it would dry into a true "off white" I kept going. big mistake. I now have a light yellow/dirty white console on my white boat. spend the extra money and go with Interlux. Im having to start all over again

                   
                  5.0

                  Great product

                  By Charly

                  from Los Angeles

                  About Me Casual/ Recreational

                  Verified Reviewer

                  Pros

                  • Protects Well
                  • Visually Pleasing

                  Cons

                    Best Uses

                      Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

                      This topside paint is easy to use and long lasting. Prep work is key. Wash boat with a mild soap then rinse. clean areas to be patched with acetone. apply patch, sand, clean with Acetone again then prime patches or bare spots. A light sanding with xx fine grit at this stage can only help. Critical to wipe entire surface with acetone prior painting. Make sure no residue remains on surface. I Sprayed exterior of boat and rolled/brushed interior. Follow directions for either method. 2 thin coats are best. Helpful hint when brushing is to apply then dab with brush tips to eliminate air bubbles and help level. No marks left behind.Long lasting and looks great. I got close to 10 years out of my paint job.

                      (3 of 3 customers found this review helpful)

                       
                      4.0

                      Just painted my deck of 27 foot boat

                      By Super Stephen

                      from Oak Park, CA

                      About Me Casual/ Recreational

                      Verified Reviewer

                      Pros

                      • Easy to Use
                      • Protects Well
                      • Visually Pleasing

                      Cons

                        Best Uses

                        • Outdoor

                        Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

                        Make sure you clean and surface sand area to be painted and it comes out great, watch what temp is outside, Urethane takes a long time to dry in the cold. Let it be and you will do just fine.
                        Don't think you can paint and go out next day give it a chance to get hard and you will love the end result like I do. Secound time in 10 years I had to paint her and will use this again in 10 years.
                        I use my boat to scuba dive and that abuse is extreme.
                        6 to 10 times a month min 3 guys with tanks and lead wieghts takes a beating.
                        All I can say is prep is important for the job to come out right.

                        (3 of 3 customers found this review helpful)

                         
                        4.0

                        Painted my track car with it...

                        By Raze

                        from Atlanta, GA

                        About Me Beginner

                        Verified Reviewer

                        Pros

                        • Easy to Use
                        • Protects Well
                        • Visually Pleasing
                        • Weather Proof

                        Cons

                          Best Uses

                          • Outdoor

                          Comments about SeaGloss Pro One-Part Polyurethane Topside Paint:

                          I used this product to paint my track car to protect it from the elements. I simply used a 4" foam roller and this paint thinned way beyond recommended ratio 1 part paint to 3 parts thinner (skim milk) to thin out the coats and allow wetsanding between to get an automotive looking paint job. This product works great even thinned that much. I put 8 coats on the car using 1 quart of paint thinned as described. After wetsanding between coats 1000+ grit and buffing the final finish I have minimal orange peel and true 'depth' in the finish. I love how durable it is and how well it stands up to oil, gasoline, brake fluid, etc.

                          Displaying reviews 1-10

                          Back to top

                          Previous | Next »

                          PRODUCT QUESTIONS
                          1 (800) 262-8464