Awl-Quik Sanding Surfacer Primer & Converters (Professional Application Only)
Sand and fill your way to a smooth finish with Awlquick Epoxy Primer/Surfacer.
Awlquick Epoxy Primer/surface is a fast-drying, medium build, easily sanded, two-component epoxy primer-surfacer. Awl-Quik acts as a two component epoxy primer for use where high build and filling is required. Easy to apply by brush, roller or spray. Not to be used below the waterline.
Key Features
- Easily sanded primer
- Use where high build and filling is required
- Best when used over other Awlgrip primers
- Use as a fairing compound
Physical Data
- Type: Epoxy Polyamide
- Formulation: Sanding surfacer
- Components: 2 (Base and Converter)
- VOC: Base D8003: 436 g/l ; Converter D9001: 354 g/l
Application
- Recommended Application Method: Conventional or airless spray, brush or roller
- Number of coats recommended: 2-3
- Induction Time after Mixing: 15 Minutes
- Pot Life: @ 77°F, 50% RH: 8 hrs.
- Recommended Wet Film Thickness: 5 mils
- Recommended Dry Film Thickness: 2-3 mils
- Application Temperature: Minimum 13°C (55°F); Maximum: 41°C (105°F).
- Primer Needed: 545 Primer
- Coverage: 609sq.ft./Gallon
- Converter: AwlGrip (D9001)
- Cleaner: T0006, T0002, or T0031 Reducers
More information
For detailed application instructions and to view available colors, see the Awlquik Epoxy Primer-Surfacer Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.