AWLGRIP

High-Build Epoxy Primer Base & Converters (Professional Application Only)

Name: High-Build Epoxy Primer Base & Converters (Professional Application Only)
Brand: AWLGRIP
SKU: P004_121_003_512
Availability: InStock

Model # P004_121_003_512 Mfg # OD9002/1GLUS

$97.99 - $259.99

Advice & How-To

AWLGRIP

High-Build Epoxy Primer Base & Converters (Professional Application Only)

Model # P004_121_003_512 Mfg # OD9002/1GLUS

$97.99 - $259.99

Advice & How-To

Color:

Capacity:

−

Complete Your Purchase

AWLGRIP

High-Build Epoxy Primer Base & Converters (Professional Application Only)

$97.99 - $259.99

REDTREE INDUSTRIES

2" Ace Paint Brush

$7.39

SEA HAWK

Epoxy Reducer, Gallon

$12.74 $72.99

2040 Masking Tape

$10.99 - $31.99

Dry Guide Coat Cartridge, 05860, 50 gr

$67.99

ENCORE PAINT

Mix & Measure Cups

$1.59 - $4.99

Fill your way to a perfect finish with Awlgrip Two-Part High-Build Primer.

AwlGrip High Build Epoxy Primer is a sandable, two-component epoxy primer that is best used as a surfacer over other AwlGrip primers and fairing Compounds. High Build Epoxy Primer can also be applied directly to properly prepared wood or fiberglass; however, best results are obtained when these surfaces are first sealed with 545 Primer. Base and converter are sold separately. Not for use below the waterline.

Key Features

Effective for pinholes, small depressions and sanding prep
Use where high build and filling is required
Effective surfacer over other Awlgrip primers
Use as a fairing compound

Physical Data

Type: Epoxy Polyamide
Formulation: High-build primer
Components: 2 (Base and Converter)
Mixing Ratio: 1 part base : 1 part converter
VOC: White Base (D8002) 347 g/l or 2.9 lb./gallon
VOC: Yellow Base (D9002) 338 g/l or 2.8 lb./gallon
VOC: Converter (D3002) North America Only 331 g/l or 2.8 lbs./gallon

Application

Recommended Application Method: Conventional or airless spray only. Pressure feed equipment required. Not for roll and tip application.
Number of coats recommended: 2-3
Induction Time after Mixing: 15 Minutes
Pot Life: @ 77°F, 50% RH: 8 hrs.
Recommended Wet Film Thickness: 8-10 mils
Recommended Dry Film Thickness: 4-5 mils
Application Temperature: minimum 13°C (55°F) maximum 41°C (105°F).
Primer Needed: 545 Primer
Coverage: 814 Sq. Feet/Gallon
Converter: AwlGrip (D9001)
Drying Time to Full Cure: 12-24 hr.
Cleaner: T0006, T0002, or T0031 Reducers

More Iinformation

For detailed application instructions, see the AwlGrip High Build Epoxy Primer Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.