Bilgekote Enamel
Model #
3822020
Mfg #
YMA102/QT
$69.99
Orders placed by 3 PM EST typically ship the same day. Orders placed after this time will be processed the next business day.
Color:
White
Capacity:
1 Quart
Out Of Stock
Item out of stock get notified when back in stock:
Thank you!
We'll let you know when it's back in stock.
Quantity not available. Please adjust.
−
+
Complete Your Purchase
Protect bilge areas with solvent- and sludge-resistant BilgeKote Enamel.
Bilgekote is a fast-drying, durable coating formulated for application to bilge areas. Bilgekote helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Additionally, Bilgekote can be used to protect lockers and bulkheads from moisture penetration.
Key Features
- Resistant to chemicals, fuel, oil and fumes
- Cleans easily for reduced maintenance
- Considerable application covering due to the paints high density
- Hard-wearing coating for bulkheads
Physical Data
- Type: One-part enamel
- Finish: Semi-gloss
- Available Colors: Gray, White
- Components: 1
- Solids by Volume: 44%
- Coverage: 450sq.ft/gal.
- VOC: 414g/l
Application
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats Recommended: 2-3 minimum
- Wet Film Thickness/coat: 4.5 mils
- Dry Film Thickness/coat: 2 mils
- Application Temperature Min./Max. Range: Minimum 50°F. and Maximum 95°F.
- Thinner: Brushing Liquid 333, Model 117945 or Special Thinner 216, Model 117598
Drying Times* (Hours)
| Drying | @59°F | @73°F | @95°F |
|---|---|---|---|
| To recoat | 3 hr. | 2 hr. | 1 hr. |
| To launch | 16 hr. | 12 hr. | 8 hr. |
Cancer –
www.P65Warnings.ca.gov
Application Method
1 to 2 Coats Recommended; Brush
,
Roller or Spray
Capacity
1 Quart
Color
White
Coverage
112 Square Feet/Quart
Cure Time
To Overcoat: 1-3 Hours; To Launch: 8-16 Hours
Type
Bilge Enamel
You May Also Like
