SOK 24V 150Ah Battery, Built-in Heater & Bluetooth, Victron CAN Comms

SOK Battery 24V 150Ah Battery, Built-in Heater & Bluetooth, Victron CAN Comms

The SOK Battery SK24V150PH is a high-performance 24V 150Ah LiFePO4 (Lithium Iron Phosphate) battery engineered for demanding off-grid, RV, and marine energy storage applications. Housed in a rugged PC+ABS enclosure with IP67 waterproof and dustproof certification, this battery is built to withstand harsh outdoor environments while delivering consistent, long-lasting power. With a nominal capacity of 150Ah and 3.84kWh of usable energy, it is an ideal building block for 24V or 48V battery banks.

The SK24V150PH integrates seamlessly with Victron Energy systems via its CAN bus communication protocol, enabling plug-and-play data exchange with the Victron Cerbo GX. This allows real-time battery monitoring and management through the Victron ecosystem without additional configuration. Bluetooth 5.1 connectivity provides independent monitoring and control directly from iOS and Android devices using the ABC-BMS app, giving users flexible visibility into state of charge, voltages, and system health.

A built-in self-heating pad enables reliable charging performance in cold climates, activating automatically when temperatures drop to ensure safe and efficient operation well below freezing. An onboard gas aerosol fire suppression system adds an additional layer of safety by rapidly containing potential thermal events. The battery also includes a convenient ON/OFF switch for quick power control and supports external sound, light alarms, and relay control for integration into larger system setups.

With over 15,000 rated charge cycles, this battery is engineered for longevity. It supports a maximum continuous discharge current of 200A and a peak discharge of 500A for up to 10 seconds, making it capable of handling high-demand loads. The built-in Battery Management System (BMS) provides protection against overcharging, over-discharging, overcurrent, short circuit, and temperature extremes, while also performing automatic cell balancing.

Key Features

• CAN communication with Victron Cerbo GX for seamless integration with Victron inverters and monitoring systems
• Built-in self-heating pad for reliable charging and operation in low-temperature environments
• Bluetooth 5.1 for real-time monitoring and control via iOS and Android apps
• IP67 waterproof and dustproof rating for outdoor and marine use
• Gas aerosol fire suppression system for enhanced safety
• 15,000+ cycle life for long-term reliability and low total cost of ownership
• 500A peak discharge current (7.5s ±2.5s) for high-demand applications
• 200A maximum continuous charge and discharge current
• Supports up to 10 batteries in parallel for expanded capacity
• Supports up to 2 batteries in series for 48V system configurations
• ON/OFF switch for quick power control
• External sound/light alarm and relay control support
• Built-in BMS with overcharge, over-discharge, overcurrent, short-circuit, and temperature protection
• Includes mounting brackets and hardware
• PC+ABS enclosure with M8 / 5/16 lug terminals
• Certifications: UL1973 & IEC62619 for battery cells; MSDS and UN38.3 for shipping