This product is not longer available, we recommend a similar product instead:
Oil Change Pump, 12V
Model #
6613558
Mfg #
17830-0012
Orders placed by 3 PM EST typically ship the same day. Orders placed after this time will be processed the next business day.
Out Of Stock
Item out of stock get notified when back in stock:
Thank you!
We'll let you know when it's back in stock.
−
+
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
- Pump Body: Bronze
- Port Size: 3/8" NPT
- Impeller: Nitrile
- Shaft Seal: Buna Lip Type
- Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Amperage
10 Amps at 12 Volts
Capacity
25.2 Quarts per Minute
Dimensions
4 7/16" x 3 3/4" x 7 7/8"
Portability
Installed
Reverse Cycle
Reverse Cycle
Type
Oil Changers
