Tie Coat Primer
Complete Your Purchase
When painting over an existing coating, using this primer first will assure good adhesion between the old and the new paint.
General purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all antifouling and topside paints. Semi-flat Burnt Orange color. Brush, roll or spray.
Key features
- Smooth finish provides an excellent bonding surface for topcoats
- Can be used as a metal primer or as a tie coat
- Compatible with all Pettit antifouling bottom paints
- Easy to use system for use on all underwater running gear
Specifications
- Primary Usage: Metal surfaces, underwater running gear, trim tabs
- Formulation: Chlorinated Rubber
- Finish: Flat
- Applies Over: Bright, cleaned, abraded metal
- Drying Time: To recoat: 2hrs.; To topcoat: 4hrs. @ 70°F
- Number of Coats Recommended: 2
- Thinner: Petit 97 Epoxy Thinner, Model 284216
- Coverage: Brush/roller: 75sq.ft./qt.; spray: 57sq.ft./qt.
- Color: Semi-flat Burnt Orange
More information
For detailed application instructions see the Pettit Tie coat primer Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication
