Nautic Boiler BXS Square Stainless Steel Water Heaters with Heat Exchanger
Complete Your Purchase
The Quick Model BXS is a square water heater. This unit produces hot water using an Incoloy® electric heating element fitted with an adjustable safety bi-thermostat. This unit features a heat exchanger made of AISI 316L stainless steel, with a capacity notably higher than that of other manufacturers. The tank interior is made of 1.5 mm gauge AISI 316 stainless steel, welded under argon shielding gas, making it highly resistant to corrosive agents. The exterior of the tank is made of sleek-looking AISI 304 stainless steel. The unit has thermal insulation made of high-density polyurethane foam, injected between the cover and tank to provide excellent heat retention. Thanks to the square design, this unit is perfect for installation in small spaces.
Key Features
- Heats water with the AC electric element or through the heat exchanger connected to the engine cooling system
- Thermostat factory set at 140°F (electric element operation)
- Double thermostat with manual reset cuts power if the water overheats
- Magnesium anode; Quick recommends checking it every 12 months
- Relief/non-return valve with discharge pipe lets you drain the water heater when not in use
- Supplied with an AC power cable
- Maximum working pressure 87 psi (tested to 116 psi)
- 1/2" fittings
- Empty weight: 30.6 lb (40L)
What's Included
- Water heater
- Mounting brackets
- 4 brass fittings
- Assembly hardware (bolts, nuts, and screws)
You May Also Like
