1241 Surface Tolerant Epoxy Coating System, Base

SEA HAWK Surface Tolerant Epoxy Coating System, Base

A multi-purpose, surface tolerant, two-part epoxy coating system that applies easily to non-optimal surfaces yet provides excellent chemical abrasion resistance for marine vessels and offshore structures above and below the waterline. Its chemically-cured formulation allows application at low temperatures, and to damp surfaces, even those exhibiting flash rust.

1241 cures to a semi-gloss finish for use in tank linings or on pipe coatings. Its self-priming nature provides an excellent surface for ship and barge antifouling hull coatings.

Requires Part 2 - 1241 Catalyst sku # 19601699

Features:

• Exceptional corrosion protection in both salt and fresh water immersion and corrosive chemical enviroments provides multiple uses for ships, marine structures, in fabrication and during new construction
• Surface tolerant formulation, reduces surface preparation time and cost
• Low temperature cure expands application window (to 0°F, -18°C)
• Quick drying provides fast re-coating
• Low VOC formulation complies with rigid VOC limits
• Base: 4 Gallons

Characteristics:

• Finish: Semi-gloss
• Color: Gray
• Volume solids: 68%
• Weight solids: 80%
• Mixing ratio: 4:1 by volume
• Coverage: 136-273 sg ft/gal
• Recommended coats: 2
• Drying time: to recoat 2-11 Hours; to overcoat 2-11 Hours
• Cure for immersion: 7 days @ 77°F
• Reducer/Clean Up: 2033

Application:

• Airless Spray
• Brush
• Roller