Gulper 220 Pump
Use this self-priming diaphragm pump as a shower or galley waste pump.
These 3.7gpm waste pump and strainer systems from Whale Pumps offer easy access with a remote mount to effectively pump shower waste, such as hair and shower products. The large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction while the ports rotate to the position you need to facilitate hose connections. It mounts vertically or horizontally making installation a snap. It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. And because there is no filter, you won’t have to worry about cleaning blocks and clogs.
Key Features
- Rubber mounting feet reduce noise by absorbing vibrations
- Non-clog electric valve technology for ease of use
- Tough housing built from marine grade materials for reliability
- Maintenance is a breeze thanks to non-choke valves with no filter to block or clean
- Double outlet valve provides continuous flow
- Multi-directional head rotates 360° for convenient, straightforward installation in confined spaces
- Can be mounted almost anywhere
- Barbed connections suitable for ¾” (19mm) or 1” (25mm) flexible hose provides simple plumbing
- Will run dry without damage and pump a mixture of air and water
- Large single diaphragm is self-priming up to 3m (10ft)
- Quiet running with low power consumption
- Marine grade materials include glass filled nylon, EPDM, Nitrile, Hypalon Rubber, Acetyl, stainless steel, brass & aluminum
- Minimum wire size required is 1.5 mm2
- Boasts IP45 rating and CE marked
- Ignition protected ISO8846
For more information, refer to the Whale Pump Gupler 220 Instruction Manual.
