Switch-Mode Dimmer 12/24V DC 200/400 Watts
Complete Your Purchase
Intervolt SLD Switch mode Dimmer, 9 to 33V DC, 16.5 Amps, for dimming one DC lighting circuit with multiple momentary push-button switches. The Intervolt SLD Switch mode Dimmer contains all the features demanded by the marine, RV & motor coach enthusiast. Designed for dimming DC (filament lamp) lighting circuits & compatible with some LED products that lack specific built-in dimmer interface electronics. Enclosed in a sleek, thermally-efficient marine-grade housing featuring a heavy-duty corrosion resistant terminal block with insulated barriers to prevent shorting. A selectable master/slave switch enables multiple units to be connected in parallel for unlimited power capacity! These marine lighting dimmers are controlled by any "normally-open" single pole single throw momentary switches (any brand).
Features of the Intervolt SLD Dimmer include:
- Soft-start function: Prolongs Bulb Filament Life
- Memory function that records last light-level setting so same brightness is resumed when turned on again
- Master/slave function that allows either dimmer to act as the master or the remote allowing unlimited power potential
- Multi-voltage capable (9 to 33V DC)
- Supports unlimited numbers of momentary push-button switches
- Diagnostic indicator via color code LED (standby mode, load on, short circuit & over temperature warning
- Protections: Transient voltage, short circuit & over temperature
- Housing Finish/Material: Marine-grade anodized aluminum with polycarbonate-PC end caps
- Dimensions: 4.73" x 3.15" x 1.58"
- Dimmer Type: Remote/Digital/Push-Button
- Input Voltage Range: 9 to 33V DC
- Power Capacity: 12V/200 Watts, 24V/400 Watts
- Power Stacking: Yes, unlimited
- Operating Temperature: -25 to 45 Deg C
- Dimming Voltage Range: 10 to 98% of input voltage
- Standby Current Draw:<10mA
- Complete Off: Yes
- Control Interface: Momentary Push-Button
- No. of Switches: Unlimited (not supplied with dimmer)
- Electrical Protections: Over-voltage, Over-temperature, Transients, Short Circuit
- Certifications & Compliance: CE-EMC - Australian C Tick (AS2064)
- 2 years warranty
