2-Part PVC Inflatable Boat Adhesive, 250mL & Bottle of Hardener
Get 5X West Advantage Points on all purchases for a limited time! Not a rewards member? JOIN NOW
Complete Your Purchase
High-strength patching glue or adhesive. Choose between one-part or two-part formulas for Hypalon or PVC.
Single-part adhesives are good for temporary repairs. For a permanent repair with the maximum of strength, use the two-part products.
Two-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC. Used in conjunction with 3695 curing agent will bond a wide variety of surfaces including PVC, nylon fabric, polyurethane fabric and foam. Easy to mix two-part supplied in sets with required amount of curing agent. Can be used as a single part for quick temporary repairs. Easy to apply with a stiff, cut down brush Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
Key Features
- Includes: 250ml can of 3026 Adhesive, 10ml bottle of 3965 Curative
- Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
- Pot Life: 3-4 hours
- Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
- Coverage: Using two coats, 1 liter bonds 1 square meter
- Apply With: Brush or roller
