6 Gallon Water Heater with Epoxy-Coated Aluminum Case and Front-Mounted Heat Exchanger, 120V AC

6 Gallon Water Heater with Epoxy-Coated Aluminum Case and Front-Mounted Heat Exchanger, 120V AC
3.5 out of 5 Customer Rating
Model # 11936523 Mfg # F600W
Model # 11936523 Mfg # F600W
Protect Your Purchase |

Details

PLUS Plan includes:

  • Wear and Tear Coverage
  • Power Surge Protection
  • Exchange for products under $400
  • Onboard service on products over $750
  • Up to 5 years of total coverage

PLUS plan goes into effect with purchase; no registration required. Purchase online, in stores or call 1 (800) 262-8464.

$66.44
$84.49
Quantity not available. Please adjust.
Temporarily Out of Stock
Email Icon
Thank you! We'll let you know when it's back in stock.
-
+

Enjoy hot water on your boat with a dependable Seaward Marine Water Heater.

Heat water dockside with 120V AC power or when underway, using engine heat. This water heater features an ignition-protected design, cladded aluminum tank, dual-wall heat exchanger and white epoxy-coated aluminum case. Heat exchanger ports are located at the "Front", on the same side as the electrical box and cold in/hot out ports. To protect against galvanic corrosion and extend tank life, use of a magnesium anode is highly recommended. For installation and maintenance, see the Seaward Water Heater Owner's Manual.

NOTE: Other Seaward Water Heater options include a choice of a galvanized steel, stainless steel or epoxy-coated aluminum case. Depending on the model, heat exchanger ports can be located at the "Front" or at the "Rear". See the full selection of Seaward Water Heaters.

Key Features (This Model)

  • White epoxy-coated aluminum case
  • Aluminum tank
  • Front-located heat exchanger ports
  • 6-gallon capacity

Key Features (Seaward Line)

  • Multiple versions to suit your installation     
  • Available for 120V and 240V  
  • Hold down brackets welded to inner tank for strength
  • Integrated pressure relief valve for safety 
  • Pressure relief valve drain tube included
  • Ignition-protected design  
  • Magnesium anode (available separately) strongly recommended to prevent galvanic corrosion of tank

Amperage 12.5 Amps at 120 Volts
Capacity 6 Gallons
Dimensions 13" Width x 13 Height x 19 Depth
Material Epoxy Coated Aluminum
Size Cold/Hot In/Out: 3/4" NPT , Engine Coolant In/Out: 3/4" (for Heater Hose); 1/2" Drain
Voltage 120 Volts
Warning
Cancer and Reproductive Harm - www.P65Warnings.ca.gov