Big B Fenders

Center rope tube allows fender to be hung vertically or horizontally with a single line.

The versatile Big B™ Fender incorporates an integral Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and areas with big tidal changes.

Big B fenders feature seamless construction, with molded ribs to minimize roll. Big Bs are made from the highest quality marine grade vinyl with a high gloss finish. Features a football needle valve for precise air pressure regulation. Available in four diameters to fit a full range of boat sizes.

Key Features

• 3/4"dia. center hole accepts up to 5/8"dia. rope for securing the fender
• Flexible, seamless marine grade vinyl construction with molded ribs. Marine grade vinyl lasts years in the sun.
• Selection of bright colors; White, Blue, Black, Navy, Cranberry, Hunter Green
• Hang it vertically or horizontally with a single line
• Needle-valve for easy inflation and long life
• Lifetime guarantee against splitting or bursting! If a taylor made fender ever splits or bursts, they will replace it.

What Size Should You Order?

• Size recommendations vary widely depending on the size, windage and weight of a vessel, as well as wind, waves and current; When in doubt, purchase a larger size
• As a general guideline, West Marine recommends one inch of fender diameter for each foot of boat length
• The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.

Four sizes

• 6" x 15" (recommended for 20' to 25' boats)
• 8" x 20" (recommended for 25' to 35' boats)
• 10" x 26" (recommended for 35' to 50' boats)
• 12" x 34" (recommended for 50' to 60' boats)