Vendor Shipping Details
This item will be fulfilled from the vendor. Delivery time varies – typically 2–3 weeks.
Restrictions: This item does not ship to a PO Box, APO, FPO, DPO or international address. Expedited shipping is not available.
West Marine will email you when your order ships from the vendor.
Truck Freight is used to ship items that exceed standard shipping limitations on weight and/or size. Delivery is only applicable within the contiguous United States. Additional shipping fees apply. Signature required for receipt of shipment.
3M™ Hookit™ hook-and-loop attachment works by enabling easy re-use when switching between grades before the discs wear out. The open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, and the disc's load-resistant coating reduces clogging of the disc, making this a good choice for woodworking and other applications where loading hinders performance. Designed for use with a random orbital sander, this disc comes in a range of grades for fine sanding and finishing, and is resin-bonded for reliable performance under high heat and pressure.
These discs use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications in addition to sanding and finishing applications.
Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Coated abrasive discs cut better and last longer when dust isn't clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are placed with space between them to help evacuate sanding dust and other debris to avoid clogging the cutting edge of the grains. The load-resistant coating also allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. All of this adds up to increased productivity and reduced material consumption.
Hook-and-loop style Hookit™ discs are perfect for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris. They are often used in applications where a 3M™ Stikit™ disc may be too aggressive, as Hookit™ discs tend to leave finer finishes than adhesive backed discs. Hookit™ sanding discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on a random orbital sander, can be removed cleanly and easily, and can be re-used again and again for the extent of the abrasive life.
- P220 Grit
- Pack of 100
Boat maintenance presents dangers to do-it-yourselfers and pros alike. Read about the gear that can help keep you safe.
By Tom Burden, Last updated: 9/10/2019
With helpful videos, advice on bottom paint selection and step-by-step instructions, this article will help you get the job done.
By Tom Burden and Brian Gordon, Last updated: 2/15/2021
As the boating season approaches, is your boat ready to go? Here are some common tasks you may need to perform.
By West Marine Staff, Last Updated: 8/22/2019