Pro X Series Tower Extension, Fits Towers 3" Diameter

Barefoot International Pro X Series Tower Extension

The re-launched Pro X Series Tower Extension is a patented water sports accessory engineered to elevate performance for barefooters, wakeboarders, and skiers alike. By clamping securely to the upper tubing of a boat's tubular wakeboard tower, the extension creates an upward tow-point pull that helps riders generate more pop off the water, achieve greater height, land softer, and learn advanced tricks at reduced boat speeds. Whether you are attempting your first raley or pushing your limits in competition, the Tower Extension provides a mechanical advantage that increases confidence while reducing the impact of falls.

The W2932 model is sized specifically for tower tubing with a 3-inch diameter. Tower Extensions are available in seven sizes to accommodate a wide range of towers — you must measure the outer diameter of your tower's tubing before ordering. Clamps are included with the unit and are not available for separate purchase.

A key convenience feature is the extension's ability to fold down completely while remaining attached to the tower. This means there is no need to remove the unit before collapsing the tower for trailering or parking the boat on a lift. The extension clamps to the tubing on the upper section of the tower and should always be installed with a slight angle toward the bow of the boat, with safety cables tensioned and mounting clamps evenly spaced and perpendicular to the horizon. The product is proudly made in America.

WARNING: Do not tow the boat with the Tower Extension installed. Do not use to pull tubes, kites, para sailors, or stranded boats. Check all hardware, clamps, and cables for wear and proper installation prior to each use. Be aware of your surroundings and stay clear of bridges, overhanging trees, low-hanging power lines, and any other obstacles. The use of this product involves inherent risks of injury or death. This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Key Features

• Patented tower extension design compatible with tubular wakeboard towers
• Upward pull point helps riders go bigger, land softer, and learn tricks at slower speeds
• W2932 fits towers with 3-inch tubing diameter
• Available in 7 size options (W2926 through W2932) to fit tubing from 1 7/8" to 3"
• Folds down entirely and remains attached while tower is collapsed — no removal required for trailering or lift storage
• Clamps included; not sold separately
• Made in America