Starlink 8’ Pole Kit with 1” Rail Standoff Kit and Single Strut
Complete Your Purchase
SEAVIEW Starlink Pole Kit, RM8148STLK
Seaview 8' tall Pole Kit for Starlink Flat HP and Starlink Gen 3 Standard antennas. Note that a Starlink wedge base is required to mount the Starlink antenna to these pole kits (see the pole top info below).
This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
The pole itself is 3" in diameter and is made from marine grade aluminum. Seaview takes the finish to another level by first taking the raw aluminum and putting it through process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process it is taken through a 3 part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
The top plate that comes with these pole kits (ADASTLKA) is setup to mount the Starlink wedge base. Seaview offers these wedge bases for the Starlink Flat HP (SVSLWB) or if you have the Starlink Gen 3 standard antenna you would use the Seaview mount SRM200WB8 that comes with the wedge base.
Fits any Starlink Antenna, but an adapter is required:
- Starlink Flat HP can use the gray wedge base that may or may not come with the antenna. The SVSLWB is the recommended white marinized wedge base.
- Starlink Standard Gen 3 (V4) would require the Seaview SRM200WB8 or ADAG3 modular top plate.
- Starlink Mini would require the ADAMINI modular top plate
Key Features
- 8' pole kit for Starlink Flat HP or SRM200WB8
- Kit Includes: 8' x 3" dia. tube, adjustable pole base, 48" support strut and 1” rail stand-offs
- Light or GPS bar (LTBR) compatible
- Waterproof adjustable base
You May Also Like
