Classic Dinghy

West Marine Classic Dinghy, 9'9" Polyethylene Rowing and Motor Tender

The West Marine Classic Dinghy is a 9'9" hard-shell tender that blends traditional rowboat styling with durable, low-maintenance construction. The hull and deck are thermo-formed from UV-stabilized high-density polyethylene (HDPE) with foam flotation built in, so it stands up to the knocks of everyday tender use. The broad 55" beam and V-hull give you a steady, comfortable ride whether you row or run a small outboard.

This dinghy seats up to three people and has a built-in motor mount for a small outboard, giving you flexible options for running to shore, fishing, or exploring the anchorage. Built-in stainless steel oarlock sockets and a center rowing seat make it a good rower too, and a dry storage compartment keeps small essentials handy. At 100 lb, it is light enough to carry on deck or store ashore, and it meets U.S. Coast Guard and NMMA safety standards.

Key Features

• Durable HDPE construction: Thermo-formed hull and deck made from UV-stabilized high-density polyethylene that resists impact and color fade
• Built-in foam flotation: Meets U.S. Coast Guard and NMMA safety standards
• Stable V-hull design: 55" beam gives a smooth, steady ride when rowing or motoring
• Rows or motors: Built-in stainless steel oarlock sockets and a motor mount on the transom
• Seating for three: Large seating areas, including a center seat for rowing
• Dry storage compartment: Keeps keys, phones, and other small items protected
• Easy to handle: 100 lb weight with molded-in carrying handles that double as tie-down points
• Stainless steel hardware: Bow eye and stern eyes for towing, lifting, and securing
• Protective rubrail: Gray rubrail helps guard the hull and the boat you're tendering to
• Made in the USA

Specifications

• Length: 9'9" (297 cm)
• Beam: 55" (140 cm)
• Height: 23" (58 cm)
• Weight: 100 lb (45 kg)
• Maximum Capacity: 443 lb (persons and gear)
• Maximum Persons: 3
• Maximum Horsepower: 2 HP
• Construction: Thermo-formed UV-stabilized HDPE hull and deck with foam flotation
• Drain Plug: Through-hull, located at the stern
• Color: White with gray rubrail

What's Included

• 1 x Classic Dinghy with built-in stainless steel oarlock sockets
• 1 x motor mount plate
• 1 x dry storage compartment
• 1 x stainless steel bow eye and 2 x stainless steel stern eyes
• 1 x through-hull drain plug
• Oars and oarlocks sold separately

Care and Maintenance

• Rinse after saltwater use: Rinse the boat and components thoroughly with fresh water after each use.
• Drain after each use: A small amount of water between the deck and hull is normal. Remove the drain plug to drain it, then reinstall the plug.
• Avoid abrasion: HDPE is very impact resistant but can wear through when dragged over gravel, asphalt, or concrete.
• Store properly: Store indoors when possible, upside down or on end with the drain plug open. Avoid resting the hull on sawhorses or 4x4s, which can cause dents.
• Protect from freezing: Do not let water freeze between the deck and hull, as it can damage the flotation foam.

Warranty

KL Industries warranty: 2 years on the deck and hull and 2 years on parts from the date of retail purchase, for personal use. Online registration within 30 days of purchase is required.