InterProtect® 2000E Barrier Coat System
Complete Your Purchase
Prevent fiberglass blistering with Interprotect 2000E.
InterProtect® 2000E is a unique two-part epoxy coating developed to protect new and used fiberglass hulls from water absorption, which can lead to poor hull performance and osmotic blistering. Formulated with Micro-plates, it creates an overlapping barrier to eliminate any direct path for water migration. In addition to use as a barrier coat, Interprotect 2000E is also an excellent fiberglass topside primer and is great for underwater metals.
Quart and Gallon Kits, comprised of separate containers of base and reactor, are offered. When mixed, kits yield either a quart or a gallon. We also provide, as individual purchases, “short-pour” 3-gallon containers and separate containers of reactor, which, when mixed, yield three full gallons. There are two low VOC formulations available: Interprotect 2000 VOC (898628) and Interprotect HS (15086606). Check with your local air quality management district for compliance requirements.
Interlux Ultimate Pontoon System
Interlux Ultimate No Sand System
Key Features
- Adheres well to fiberglass, composite, metal, and wood
- Long overcoating times add flexibility and versatility in a boatyard environment
- Compatible with Interlux primers, antifouling,s and Interfill fairing compounds
- Forms a barrier against water intrusion
Physical Data
- Type: Multi-Purpose Two-Part Epoxy Primer
- Finish: Matte
- Available Colors: Grey, White
- Components: 2
- Solids by Volume: 45%
- Coverage: 240 sq. ft/gal.
- VOC: 464g/l
Application
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats Recommended: Varies with application
- Wet Film Thickness/coat: 5.6 mils
- Dry Film Thickness/coat: 2.6 mils
- Application Temperature Min./Max. Range: 10°C/50°F--35°C/95°F
- Thinner: Interlux 2316N (Model 198598)
Drying Times* (Hours)
| Drying | @41°F | @50°F | @73°F | @95°F |
|---|---|---|---|---|
| To touch | 4 hr. | 3 hr. | 2 hr. | 30 Min. |
| To recoat | 10 hr. | 5 hr. | 3 hr. | 2 hr. |
| To launch | 24 hr. | 24 hr. | 12 hr. | 8 hr. |
*The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before launching.
More information
For detailed application instructions, see the Interlux InterProtect® 2000E Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
You May Also Like
