P319 Low Profile Thru-Hull Dual Frequency Transducer

P319 is a nylon thru-hull Broadband transducer for smaller sportfishing and commercial vessels up to 25' in length, fishing in depths of less than 3,000'.

The P319 is a 600 Watt thru-hull low-profile depth and temperature transducer with a plastic housing, that operates at 50kHz and 200kHz. It has a fixed (non-retractable) insert. The P319 is designed for installation only in the flat bottom of a boat. It does not have any built-in tilt for deadrise compensation.

Although most P319s are now made as a generic 'mix and match' (MM) transducer with a brand-specific adapter cable, this unit has a different internal circuitry and a permanent fixed 10M cable and cannot be used with MM adapters.

This version is compatible with Raymarine A-Series, DSM25, c97, c127, e97, e127, e7D, a67, a68.

Note: The P319 is identical in performance to the B60 with a bronze housing (12°/20° tilt), the B117 with a bronze housing (0° tilt), and the SS60 with a stainless steel housing (12°/20° tilt).

Key Features

• Dual frequency, single ceramic element in a compact, low-profile housing
• Nearly-flush design minimizes drag with only 3/16" protruding outside hull surface
• Good target detail in shallow water at 200kHz and good deep-water bottom tracking at 50kHz
• Right angle cable exit offers low headroom and protection if transducer is stepped on
• Rubber washer (included) allows tightening of hull nut to irregular hull surfaces
• Housing is ABYC H-27 compliant
• Suitable for planing hull powerboats and racing sailboats 25' and up
• Compatible with Raymarine A-Series, DSM25, c97, c127, e97, e127, e7D, a67, a68

Specifications

• Style: Thru-hull
• Cable Length: 30' 
• Monitors: Depth and temperature
• Material: Plastic
• Hull Deadrise Angle: 0°-7°
• Transmit Power: 600W (RMS)
• Frequency: 50/200kHz
• Max. Depth: 800'-1200' (50 kHz) / 400'-700' (200kHz)
• Beamwidth: 45° (50kHz) / 12° (200kHz)