Side-Power SX Series 100kg External Stern Thruster 24VDC
Complete Your Purchase
Side-power now offers a complete external stern thuster assembly, specially designed for installation on boats with twin stern drives. It utilizes special cowls to enable good performance by diverting the water flow past the stern drive legs, which normally blocks the water flow & the thrust. The units come pre-assembled, wired & sealed in the waterproof box & only require a small hole into the boat's transom to attach the power & control cables. The cable connection points are fully sealed, so that it is ignition protected & can be installed in petrol powered boats. This stern thruster option can also be the best choice for boats without stern drives, if the inside configuration of the boat's stern makes a standard thruster installation impractical.
- Perfect choice for boats where the inside configuration of the boat's stern makes a standard thruster installation impractical
- When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives
- The special cowls enable good performance by diverting the water flow past the stern drive legs which normally blocks the water flow & the thrust
- Pre-assembled thruster unit in a rugged GRP casing for simple external installation
- Waterproof & ignition protected: can be installed in gasoline-powered boats
- Requires only small holes in the boat's transom for power/control cables & mounting
- Serviceable when boat is lifted (refitted with new O-ring seal)
- Boat Size: 40 to 56'
- Internal Tunnel Diameter: 185mm
- Power: 6.3kW at 21VDC
- Propulsion System: Twin
- Minimum Battery Capacity: 760 CCA SAE
You May Also Like
