Six10® Thickened Epoxy Adhesive
4.6 out of 5 Customer Rating
Model # 10287571 Mfg # 610
Model # 10287571 Mfg # 610
Quantity not available. Please adjust.
Temporarily Out of Stock
Email Icon
Thank you! We'll let you know when it's back in stock.
-
+

Frequently Bought Together

Two-part strength in caulking gun convenience.

Epoxy bonds incredibly well to woods, fiberglass materials, metals and concrete, but it is typically a two part system that requires mixing cups, stir sticks, pumps, fillers and other equipment and can be intimidating to some users. West System has always aimed to make using epoxy easier; Six10® is the result of this pursuit and effectively takes the intimidation out of bonding with epoxy.

Six10® uses a unique tube with separate chambers for epoxy resin and hardener. As both components exit the tube they mix in a static mixing nozzle and are ready for application as they exit the nozzle opening; simply apply epoxy as you would caulk. Six10® has a working time of 42 minutes (within the static mixer) so it can be used for a wide variety of projects. The epoxy is pre-thickened to prevent sagging during the curing process. As the epoxy is mixed or spread, it will thin slightly and can be used to wet out moderate weight fiberglass or carbon fiber. Initial cure is achieved in 5-6 hours.

If you only need a little amount of epoxy, squeeze out what is needed then remove and dispose the static mixer and cap the tube. The separation of the resin and hardener allows Six10® to be stored for later use. Additional static mixers can be purchased separately in sets of two or by the dozen for later use.

Remove some of the stress of working with epoxy by using Six10® cartridges with a static mixer and caulking gun convenience for your next bonding project.

Key Features

  • Easy to use cartridge with static mixer
  • Ideal for bonding applications and wetting out moderate weight fiberglass and carbon fiber
  • Designed to balance properties of 105 resins with G-Flex flexibility
  • Unique two chamber tube allows storage of an opened tube
  • Additional static mixers available in two or twelve packs (sold separately)

Best Use Two-Part Epoxy Resin
Capacity 6.46 Ounces Cartridge
Color Clear
Cure Time 5-6 Hours
Type Two-Part Epoxy Adhesive
Warning
This product can expose you to chemicals including, epichlorohydrin, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov