57mm Carbo Ratchamatic Flip-Flop Block

Model # 9485723 Mfg # 2144
5 out of 5 Customer Rating
Advice & How-To
Orders placed by 3 PM EST typically ship the same day. Orders placed after this time will be processed the next business day.
57mm Carbo Ratchamatic Flip-Flop Block
Model # 9485723 Mfg # 2144
5 out of 5 Customer Rating
Advice & How-To
Orders placed by 3 PM EST typically ship the same day. Orders placed after this time will be processed the next business day.
Out Of Stock Item out of stock get notified when back in stock:
Thank you! We'll let you know when it's back in stock.
Quantity not available. Please adjust.
+

Small Boat Flip-Flop Ratchamatic blocks pivot around the line axis to keep the line close to the deck. 

Harken's high-load Flip-Flop Block has a low profile, lightweight pivoting lead that articulates from side to side. Its hinged construction allows for various lead angles in mainsheet systems, mast-base control lines and spinnaker halyards, keeping lines clean and close to the deck. Ratchamatic feature gives sailors the holding power of up to 15:1. Ratchet can be adjusted to higher or lower load depending on the sailor's strength, sailing style and system usage.

The Ratchamatic Flip-Flop is a load-sensing  ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase.

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Lightweight Carbo Ratchets are available in 40mm, 57mm and 75mm sizes. All the Carbo Ratchets feature a recessed On-Off switch that is easily operated from either side. The 40mm cam-arm versions work in ratchet mode only. Commonly 57mm Flip-Flop blocks are for halyard leads or mainsheet leads. 

Key Features

  • Hinged construction allows for various lead angles
  • Aluminum hardcoat-anodized side plates 
  • Adjustable ratchet at higher or lower loads
  • Ratchamatic blocks are hand and crew savers
  • Allows a line to be eased instantly with control 
  • Hardkote-anodized aluminum sheaves
  • Sheave Diameter: 2 1/4" (57 mm)
  • Max. Line Diameter: 3/8" (10 mm) 
  • Max. Working Load (MWL): 500 lb. (227 kg)   
  • Breaking Load: 1000 lb. (554 kg)
  • Weight: 5.5 oz. (156 g)
  • Length: 4 5/16" (110 mm)

Becket No Becket
Diameter 3/8 Inch or 10 mm
Direction Any
Integral Cleat No Integral Cleat
Length 4 5/16 Inches
Mount Type Mechanical Fasteners
Ratchet Ratcheting
Safe Working Load 500 Pounds
Type Single Pivoting
Weight 5.5 Ounces
Sheave Diameter 57 mm

You May Also Like

Reviews