Dual Mount Aft Rake (Requires Plate) - Black

Seaview Dual Mount Aft Rake (Requires Plate) - Black

The Seaview PMADM3M1BLK is a 28-inch aft-leaning dual mount that allows you to install a satellite dome, thermal camera, or other marine electronics directly above your radar. By elevating your satdome or camera above the radar, this mount ensures maximum performance from all of your onboard electronics and eliminates radar interference. The bottom mounting plate comes pre-drilled to accommodate closed-dome radars and open-array radars currently manufactured up to 4.5 feet in diameter. The top mounting plate is modular and sold separately, allowing you to replace only the top plate if you upgrade your satdome or camera—without replacing the entire mount.

On this aft-leaning 28-inch dual mount, the open array platform sits 6-1/2 inches above the mounting surface. The vertical distance between the two mounting platforms is approximately 21-3/4 inches to 22-1/4 inches, depending on the top plate used. The mount features a 20-degree aft-leaning profile (30° aft rake per Fisheries Supply specifications) and a compact 10-inch x 10-inch square base footprint—ideal for vessels with limited mounting space.

The hollow oval mast section routes cables cleanly and efficiently, and a waterproof cable gland is positioned aft and below the top plate. This is an M1 style mount; compatible top plates for satdomes include ADA-S1, ADA-S2, and ADA-S4, while ADA-F1 is compatible for thermal cameras.

Includes base gasket/drill template, base plate fastener seals, top plate gasket, radar cable grommet, and installation instructions.

Key Features

• Aft-leaning 28-inch dual mount positions satdome or camera above radar to eliminate interference
• Pre-drilled lower platform fits most closed-dome radars and open-array radars up to 4.5 ft
• Modular top plate design (sold separately) — replace only the top plate when upgrading electronics
• Compact 10" x 10" square base footprint ideal for limited mounting space
• Hollow oval mast section allows for clean, easy cable management
• Waterproof cable gland positioned aft and below the top plate
• Light bar ready — compatible with Seaview modular light bars, spreaders, nav lights, floodlights, GPS/VHF antennas, and weather instruments (accessories sold separately)
• Constructed from high-quality marine-grade aluminum
• Treated with anodized primer and finished in black powder coat
• M1 mount style — compatible top plates: ADA-S1, ADA-S2, ADA-S4 (satdomes), ADA-F1 (cameras)
• Compatible with up to 4.5 ft open array radars and 16–18 in satellite domes