Side-Power SE Series 130kg Thruster 12VDC
Complete Your Purchase
To provide reliable & safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern & other locations that may get wet or be exposed to petrol fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no petrol fumes can enter & be ignited by sparks. The other advantage is that the electric parts that could be damaged by water are also covered & protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry. The SE130 is an excellent choice for yachts from 42 to 62' that desire a larger (10") tunnel for improved thrust, without the cost of counter-rotating props. The SE130's twin props generate up to 286lb. of thrust to easily maneuver large motor yachts in strong winds & heavy currents. Side-Power's wide range of control panels & remotes allow you to customize your SE130 installation to fit each application to the owner's personal specifications.
- Certified to ISO 8846 ignition protected standards
- Water proof (not for submerged mounting)
- Tinned plated brass terminals
- Manufactured, tested & delivered as a ready sealed unit, ensuring that the installer does not have to fit any other parts that can jeopardize the hermetical seal
- Supplied with plug & go control cable
- Ignition protected housing can be opened & thereby retains serviceability of components inside the enclosure
- Power: 6.5kW
- Internal Tunnel Diameter: 250mm
- Propulsion System: Twin, 5-Blade
- Boat Size: 42 to 62'
- Battery Capacity: 1425 CCA SAE
- Sealed Gearleg
- (TL min.) Minimum Tunnel Length: 253mm / 9.96in
- (TL) Recommended Tunnel Length: 303mm / 11.93in
- (T min.) Minimum Tunnel Wall Thickness: 7mm / 0.28in
- (T max.) Maximum Tunnel Wall Thickness: 9mm / 0.35in
