12° Tilt Thru-Hull Hybrid Dual Imaging Transducer

Clearance

12° Tilt Thru-Hull Hybrid Dual Imaging Transducer

3.8 out of 5 Customer Rating
-
+
Availability
  • In Stock
Ships from supplier, typically 2-3 weeks.

Vendor Shipping Details

This item will be fulfilled from the vendor. Delivery time varies – typically 2–3 weeks.

Restrictions: This item does not ship to a PO Box, APO, FPO, DPO or international address. Expedited shipping is not available.

West Marine will email you when your order ships from the vendor.

$388.88
This item is currently unavailable.
Enter your email address to be added to the waitlist.
Model # 14706618 Mfg # 000-11134-001
Truck Freight

Truck Freight is used to ship items that exceed standard shipping limitations on weight and/or size. Delivery is only applicable within the contiguous United States. Additional shipping fees apply. Signature required for receipt of shipment.

Warning Hazard shipping
Item Can only Ship to Store

Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer. Works with HDS Gen2 Touch and Elite-7 HDI fishfinders. Provides 50/200kHz traditional frequencies plus 455/800kHz DownScan Imaging plus temperature. The transducer comes with a 33' cable and blue 7-pin Lowrance connector which plugs directly into the Gen 2 Touch and the Elite-7 HDI. The transducer must be selected in the installation menu on the device.

  • Frequency: 50/200kHz, 455/800kHz DSI
  • Beamwidth: 50kHz 45°, 200kHz 11°, 455kHz (Fore to aft 2.8°, Port to starboard 56°), 800kHz (Fore to aft 1.6°, Port to starboard 32°)
  • Material: Bronze
  • Transmit Power: 600W (RMS)
  • Maximum Depth: 50kHz 3,000', 200kHz 1,000', 455kHz 300', 800kHz 100'
  • Cable Length: 33'
  • Style: Thru-hull
  • Tilted Element Angle: 12°
  • Hole Diameter for Installation: 2.375"
  • Sensors: Depth/Temp
Beam 16x25 Degrees Low-Frequency
Deadrise Angle 0 to 12 Degree
Frequency 50/200+ 455/800kHz
Material Bronze
Maximum Depth 2500 Feet
Sonar Depth
Type Thru-Hull