545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
Model #
P004_121_003_509
Mfg #
OD8001/1QTUS
$84.99
-
$209.99
Model #
P004_121_003_509
Mfg #
OD8001/1QTUS
Quantity not available. Please adjust.
Temporarily Out of Stock
Thank you!
We'll let you know when it's back in stock.
-
+
Primer system that fights your corrosion battles for you.
Awlgrip 545 is a two component epoxy primer system with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates above or below the waterline. The two part system consists of a base and converter, and is used to seal filler primers and fairing work before applying topcoats.
Key Features
- Excellent corrosion and adhesion properties
- Use where high build and filling is required
- Used to seal filler primers
- Gives an ideal undercoat for all Awlgrip topcoats
Physical Data
- Type: Epoxy Polyamide
- Formulation: Top/Bottom epoxy primer
- Components: 2
- VOC: 435 g/lt
Application
- Recommended Application Method: Conventional or airless spray and brush/roller
- Number of coats recommended: 2-3
- Induction Time after Mixing: 15 Minutes
- Recommended Wet Film Thickness: 7-10 mils
- Recommended Dry Film Thickness: 2-3 mils
- Application Temperature: minimum 13°C (55°F) maximum 41°C (105°F).
- Primer Needed: Ultra Build Primer
- Coverage: 497 Sq. feet/gallon
- Converter: AwlGrip (D3001)
- Cleaner: T0006, T0002, Reducers
Drying Times* (Hours)
Drying @77°F | Spray | Brush | Roll |
---|---|---|---|
To recoat | 1 hr. | 12-14 hr. | 12-14 hr. |
More information
For detailed application instructions see the
AwlGrip 545 anti-corrosive Data Sheet.
NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
Cancer and Reproductive Harm –
www.P65Warnings.ca.gov