WEST SYSTEM–Six10 Thickened Epoxy Adhesive
Hazard Shipping Information
Standard Shipping (ground service) is used to ship items that are considered hazardous. Delivery is only applicable within the contiguous United States. Additional shipping fees may apply. Signature required for receipt of shipment.
Six10 Thickened Epoxy Adhesive
|Best Use||Two-Part Epoxy Resin|
|Capacity||6.46 Ounces Cartridge|
|Cure Time||5-6 Hours|
|Type||Two-Part Epoxy Adhesive|
Two-part strength in caulking gun convenience.
Epoxy bonds incredibly well to woods, fiberglass materials, metals and concrete, but it is typically a two part system that requires mixing cups, stir sticks, pumps, fillers and other equipment and can be intimidating to some users. West System has always aimed to make using epoxy easier; Six10® is the result of this pursuit and effectively takes the intimidation out of bonding with epoxy.
Six10® uses a unique tube with separate chambers for epoxy resin and hardener. As both components exit the tube they mix in a static mixing nozzle and are ready for application as they exit the nozzle opening; simply apply epoxy as you would caulk. Six10® has a working time of 42 minutes (within the static mixer) so it can be used for a wide variety of projects. The epoxy is pre-thickened to prevent sagging during the curing process. As the epoxy is mixed or spread, it will thin slightly and can be used to wet out moderate weight fiberglass or carbon fiber. Initial cure is achieved in 5-6 hours.
If you only need a little amount of epoxy, squeeze out what is needed then remove and dispose the static mixer and cap the tube. The separation of the resin and hardener allows Six10® to be stored for later use. Additional static mixers can be purchased separately in sets of two or by the dozen for later use.
Remove some of the stress of working with epoxy by using Six10® cartridges with a static mixer and caulking gun convenience for your next bonding project.
- Easy to use cartridge with static mixer
- Ideal for bonding applications and wetting out moderate weight fiberglass and carbon fiber
- Designed to balance properties of 105 resins with G-Flex flexibility
- Unique two chamber tube allows storage of an opened tube
- Additional static mixers available in two or twelve packs (sold separately)
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.