Active Imaging 3-in-1 Transducer
Complete Your Purchase
SIMRAD Active Imaging 3-in-1 Transducer: Unleash Your Fishing Potential
Discover More with Advanced Sonar Technology
Transform your fishing experience with the SIMRAD Active Imaging 3-in-1 Transducer. Perfect for pinpointing fish-holding areas such as rockpiles, standing timber, weedbeds, ditches, and drop-offs, this cutting-edge sonar technology delivers unparalleled clarity and high-resolution images, helping you find more fish than ever before.
Key Features:
-
Superior Imaging Technology: With Active Imaging™ 3-in-1 sonar, you get the best of CHIRP, SideScan, and DownScan technologies all in one transducer. Enjoy a new level of detail and range that outperforms traditional imaging methods.
-
Enhanced Target Identification: The exclusive FishReveal™ Smart Target View allows you to easily distinguish fish from surrounding structure and cover. This high-detail view enhances your ability to recognize fish-holding areas quickly.
-
Wide Frequency Support: The transducer supports both Medium and High CHIRP frequencies (83/200 kHz) as well as 455/800 kHz, ensuring optimal performance and versatility for various fishing environments.
-
Compatibility: Seamlessly integrates with Simrad NSS evo3 and GO series displays, providing an intuitive user experience for all your fishing needs.
Elevate your fishing game with the SIMRAD Active Imaging 3-in-1 Transducer. Experience unmatched clarity and detail, allowing you to locate fish-holding structures from greater distances. Get ready to catch more fish and enhance your time on the water!
Review Snapshot
by PowerReviews
Ratings Distribution
Most Liked Positive Review
Great quality, easy install!
This transducer installed easy and was quick to connect to my MFD and get tuned properly. I immediately noticed its ability to maintain depth readings while underway. I mounted it in a spot that stays under water at idle speed and underway. Works great!
Most Liked Negative Review
i have no choice but to keep replacing it bad wire placement
I wish they had moved the wire or protected it better this is my 3rd one debrie hits it and the wire breaks off.
Reviewed by 11 customers
Love it
Verified Buyer
Submitted as part of a sweepstakes entry
Catch more fish
Great quality, easy install!
Verified Buyer
Submitted as part of a sweepstakes entry
This transducer installed easy and was quick to connect to my MFD and get tuned properly. I immediately noticed its ability to maintain depth readings while underway. I mounted it in a spot that stays under water at idle speed and underway. Works great!
This product has improved my MFD tremendously.
Verified Buyer
Submitted as part of a sweepstakes entry
The Active Imaging 3 in 1 Transducer has been a great update to my Simrad 12" EVO 3s.
Great customer service
Verified Buyer
Submitted as part of a sweepstakes entry
Fishing on the river
Would buy again
Verified Buyer
Submitted as part of a sweepstakes entry
Prefect transducer for Simrad.
Q&A
Showing 8 out of 8 Questions
- Q
As a temporary measure, could I mount this in the inside of my boat and get reasonable results? Depth and fish marks while trolling at 3mph?
- Asked by Mike
- Verified Reply - JordanUnfortunately, it will not. Was this answer helpful to you
- Q
Is this product Mfg # 000-14489-001 compatible with NSS EVO 3
- Asked by Javi
- Verified Reply - KaseyWith ActiveImaging you don't need an adapter, you can connect it directly at the Sonar 2 port.Was this answer helpful to you
- Q
Garmin has a Y-cable to have two transom mount transducers wired together where one does structure right only and the other does all three functions. This solves issue with not shooting through motor on catamaran. Do these transducers have a similar option?
- Asked by Rob
- Verified Reply - MichaelPer Simrad: "We do not offer a splitter or a Y cable for a Active Imagine Transducer. As the Evo3 displays are connected via NMEA2000 and Ethernet, that will share all sonar information." Was this answer helpful to you
- Q
Will this work with Simrad NSS9 EVO2. Thanks Scott
- Asked by Scott
- Verified Reply - MaureenPer the vendor: "Unfortunately no, you would need the evo3 or GO for ActiveImaging Transducer. For the evo2 you would want the Totalscan if you want a 3-in-1.": You are looking for Simrad# 000-12568-001 Totalscan MED/HGH/455/800kHz w/20ft cable, which is only available via Special Order. If you would like to place a special order, please visit your local West Marine with the information above or email us at wmcustomerservice@westmarine.com. Please keep in mind that all special orders have a lead-time of 2-3 weeks from the time they are ordered, as they come straight from the manufacturer.Was this answer helpful to you
- Q
Will this transducer work on my GO7 if I upgrade the software in my unit?
- Asked by Patrick
- Verified Reply - MaureenPer the vendor: " It should work on the GO7 XSE or XSR models as long as the software is updated."Was this answer helpful to you
- Q
I have a Simrad with a 3-1 transducer does this transducer measure water temperature I cannot get it to display on the unit?
- Asked by Mike
- Verified Reply - StephenThe Simrad Active Imaging 3 in 1 transducer does not measure water temperature.Was this answer helpful to you
- Q
Does this product fit on the simrad Go7 xse? Do i need and cable pin adapter, since mine its a 9 pin conector?
- Asked by Flavio
- Verified Reply - NancyYes, it is compatible with Simrad GO series displays.Was this answer helpful to you
- Q
I have the mass evo3 and do not see the selection for this transducer. What do I do?
- Asked by Walter
- Verified Reply - MaureenPlease contact Simrad directly for troubleshooting assistance. https://www.simrad-yachting.com/contact-us/Was this answer helpful to you